Top 10 Best 1/3 HP Motor Sanders

What Real People Are Saying About The Grizzly H6070

Wonderful Tool!

I give this sander a 5 out of 5. It has excellent power for the size of the machine. It arrived after two days and I had it assembled and working in 20 minutes. There's only one thing I am not fond of. The clamp lever for the belt sander is made out of a flimsy plastic that will break I not handled with care, but this is easily fixed with a hex bolt, it's just an inconvenience. The dust cover for the disc will get in the way and make it difficult to change a disc pad. I just left the cover off for easy access. At one point I was using the disc and a friend was using the belt. It would strain the machine if pushed too hard, but we could both manage to work at the same time if needed. I purchased it mainly for detail sanding and knife work. I had an old file I wanted to turn into a knife, and between the disc and the belt I was able to make a fairly nice knife! I hope this helped give you some more information. It's a great product.

Good first knife grinder.
  • JMA - February 18, 2014

So I thought I might be interested in knife making, and while there are many methods for grinding the blade the smart money seems to be on using a belt grinder. For various reasons. So I tried it, Lo and behold I liked it and decided to pursue it. This grinder is the best (cheapest) way to see if this hobby is for you. There are a good variety of belts available for it and they are inexpensive. That being said you will burn through them very quickly. The machine is pretty roundly trashed on the blogs it is loud and clanky, very under-powered and the work surfaces are not meant for serious use, e.g. are not smooth and cannot be properly leveled. All of this is true. So why did I give it 5 stars? Well, for 129USD you can find out if this is worth pursuing before you drop 2500 on a Burrking or even 700 on the 2x72 grizz. I have subsequently upgraded and my 1x30 still sees a lot of use lately I have been keeping a surgi-sharp honing belt on it and using it to but a razor edge on the knives that I make and even those I did not. It's a great machine as long as you know it's limitations.

great little tool for this price
  • Kelly - August 14, 2016

This was a cheap investment and I I got more than I expected. It does a fine job and is much quieter than the screamer it replaced. I use it mostly for little touch ups and it has performed well. It does not move when simply set on the bench. My little dust connection is one and one quarter inch and my large connection is 3". This has a port somewhere in the middle, that's my only beef with this unit. One review stated there was too much plastic. The only plastic is shielding and the second rate table guide - but what do you expect with this price. It's a hard worker and runs steady while sitting still on the bench - I got my money's worth and it was all I wanted.

Wow! Great Sander!

I bought this for spare time hobby knife-making. It's awesome. I haven't yet been able to choke out the motor and get it to stop by pressing too hard on the belt. I used a little delta of about the same size at a friend's house, and though it also performed admirably, it reached it's maximum torque frequently.

There's some plastic on this thing that you'll want to be careful with. It will break. The moving parts--motor, etc--are all metal. but the tightening wheels and levers are a sort of heavy duty plastic that you'll break off if you push them too hard. Be cautious, and they will last forever. Even if you break them, you can still use the very solid metal bolt that the plastic attaches to, it just won't be as convenient.

I was surprised that it came with a belt and sanding disk so I could plug it in and try it out immediately. Lots of power, and it's nice and quiet, as well as well-balanced. It doesn't shake or rattle, just purrs. This unit only weighs about 20 pounds, but its enough to hold it steady, which is a must for me, since I have no work bench, and must move this outside to use it, then move it back inside to keep it dry.

A wider belt is much better for most types of sanding, but honestly, if you pay attention to what you're doing, and space is an issue (as well as cost) this little belt/disk sander is pretty amazing. I would highly recommend this hobby sander to anyone.

Nice hobby sander
  • D3 - January 7, 2012

I bought this for quick stock removal and shaping of hobby materials and it preforms perfectly for all my requirements. I would recommend this to friends and would buy it again without hesitation. Shipping was fast!

People's Choice

These Are Some Of The Highest Rated 1/3 HP Motor Sanders Available Today
Palmgren 81061 (AmazonUs/ERCT9) featured image

2. Palmgren 81061 (AmazonUs/ERCT9) Disc & Belt Sander

  • (44 Ratings)

The Grizzly H6070 was definitely our favorite 1/3 HP Motor Sanders. That doesn't mean there aren't a few other superb selections when it comes to 1/3 HP Motor Sanders. We have a breakdown of them here.

Palmgren is an additional top manufacturer of Sanders. They build the tool next up on our lineup. Palmgren's Disc & Belt Sanders are great as well. It was terrific to try the 81061 (AmazonUs/ERCT9). I was very satisfied with this tool!

The Palmgren 81061 (AmazonUs/ERCT9) Disc & Belt Sander, at $220.00 is a particularly great Sander for the price. The Palmgren 81061 (AmazonUs/ERCT9) is really a sound option. Of you are not sure about our number one selection, I'd suggest you opt for this Sander.

Full Palmgren 81061 (AmazonUs/ERCT9) Review

Palmgren 81061 (AmazonUs/ERCT9) Features

1/3 HP, 120/240VAC motor, 3.5/1.75 amp, 3500 RPM

2-Inch x 42-Inch Belt speed 4400 SFPM

6-Inch PSA abrasive disc, 3500 RPM

Belt arm operates vertically and horizontally

The BD1500 by POWERTEC and the BD1030 by POWERTEC are worthy of looking into as well. Both tool brands are popular for their premium Sanders. Both tools are highly rated also. The BD1500 boasts a score of 3.2/5 when compared to 3.7/5 star rating given to the POWERTEC BD1030.

The BD1500 by POWERTEC offers some really choice features such as Includes: heavy duty belt and disc sander combination flaunts a 1”x30” sanding belt, 5” sanding disc, 2 work tables with 0° - 45° tilt, heavy duty miter gauge, and 2 Dust ports. The BD1030 by POWERTEC although, is tough to beat offering Powerful 1/3HP Induction motor for optimum sanding outcome and even Adjustable belt tracking ensures true alignment.

Each of these couple options make an outstanding option if you're shopping for 1/3 HP Motor Sanders

Honorable Mentions

We found a few more great 1/3 HP Motor Sanders on Amazon. Listed here are a number to pick from if the tools you already looked at don't be a good fit for you. We uncovered a number of excellent choices on the market to pick from. The Sanders we graded above are our favorites. That being said, these Sanders shown below offer several unique characteristics on top of the fact that they are each top ranked 1/3 HP Motor Sanders.