Top 9 Best 1 x 30 Inch Belt Sanders

What Real People Are Saying About The WEN 6515T

Great for the price. belts easy to find, change and track.

wonderful little sander. the belt section is easy to access, switch belts and track the belts to center. There is a metal plate behind the belt so that sharpening chisels, scissors, knives and other hand tools is very easy. The motor is strong, and I have not noticed any bogging down during my use. I used this, straight out of the box, for nearly 3 hours and had no motor issues whatsoever. The deck on the belt is difficult to keep tight, so it frequently falls if I rest any tool on it. I chose not to use the deck anymore, and just sharpen my tools free-hand. The disc section is junk. The pad is glued to the machine, so in order to change pads I had to use a heat gun to pull the pad off, then clean the adhesive remnant with mineral spirits. I added a hook and loop pad to the disc section and just buy hook and loop disc paper for it. problem solved. the deck for the disc is better than the deck for the belt, but it is still pretty flimsy. The angles on the decks are not accurate. The base is sturdy, and I have not had any walking, wobbling or balance issues so far. I have put about 20 hours on this machine in the past 3 weeks and have already ordered another one for my brother for christmas.

More
Outstanding Quality and Price

This is my first WEN product. I was hesitant to purchase it due to the low price and expecting to "get what you pay for". Well, I was wrong. I have used this for two days, a few hours each day. The belts are still intact and have not had to make any adjustments. I am not 100% convinced the instructions were correct, but if you use your head, logic and common sense, the installation works out. This is a well made sander with a powerful motor.

I have also borrowed the H.F. version of this sander and prefer WEN. The quality is comparable, but the price of the WEN is much better and the setup was much easier.

You will not go wrong with the WEN belt sander.

More
Quality control issue

After returning the first one I received I got a decent sander. The first one I received had bad rollers that wouldn’t align the belt properly and the table was very rough and had lots of corrosion. The disc sander housing was very rough and chipped. I’m satisfied with the second sander received and it works well

Good price on a light work sander.

This is not for heavy duty work, but I bought it for knife sharpening and it works great for that. Also I make bassoon reeds and the disc sander will be great for evening up cane. The belts require a little strength to change as the spring on the tensioning pulley is very strong, but you can use a wrench or a big screwdriver as a lever to help out.

More
A nice addition to the small home shop.

Plenty of power, dust collection systems work well when coupled to a small shop vac. The work tables are decent and adjustments are relatively precise. Included abrasives are ok. I was pleasantly surprised how true the belt runs. It does bog down a little if you really are hogging in but overall this machine has plenty of power to get the job done. It isn't even all that noisy. Anyone know what type of motor this has? It really is smooth with very little to no vibration. I was not expecting that. Again, for the price (not expecting the world from it) I think this really can't be better! Great job WEN.

More

People's Choice

These Are Some Of The Highest Rated 1 x 30 Inch Belt Sanders Available Today
Grizzly H6070 featured image

2. Grizzly H6070 Disc & Belt Sander

  • (174 Ratings)

The WEN 6515T was really our number one 1 x 30 Inch Belt Sanders. However, there were a handful of other really high quality 1 x 30 Inch Belt Sanders we wanted to show you here that just barely missed the mark.

The next in our tool break down is built by Grizzly which is a very respectable tool manufacturer. Grizzly's Disc & Belt Sanders are no exception. I was eager to try the model H6070 and I was not disappointed!

The Grizzly H6070 Disc & Belt Sander, at $156.95 is a particularly excellent Sander for the price. The Grizzly H6070 is really a solid option. Of you are unsure about our top pick, I'd advise to choose this Sander.

Full Grizzly H6070 Review

Grizzly H6070 Features

1/3 HP, 110V, single-phase, 3450 RPM motor

Both belt and disc sanding tables tilt 45 degrees

Belt sander table size, 5-1/8" x 5-1/8"

Disc sander table size, 4" x 7-5/16"

Removable belt platen and idler roller guard

Apart from the selections we already included, I would evaluate the Rikon 50-151 and the POWERTEC BD1500. Both tool brands are popular for their high quality Sanders. Both tools are top rated also. The Rikon advertises a score of 4.2/5 as contrasted against the 3.2/5 star rating received by the POWERTEC BD1500.

The Rikon 50-151 has a couple of features you might not experience on competing Disc & Belt Sanders. One example is Belt Table Tilts from -0Degree- 45Degree. The POWERTEC BD1500 although, is very competitive offering Includes: heavy duty belt and disc sander combination flaunts a 1”x30” sanding belt, 5” sanding disc, 2 work tables with 0° - 45° tilt, heavy duty miter gauge, and 2 Dust ports and even Features: 2 cast aluminum tables provide exceptional work support and tilts up to 45 degrees, precision tracking system; Steel base prevent vibrations during operation.

Both of these two selections make an exceptional option if you're shopping for 1 x 30 Inch Belt Sanders

Honorable Mentions

If you are thinking that the 1 x 30 Inch Belt Sanders we rated above don't do it for you, here are a handful of other options that may likely be a better fit. It's a fact that there are a lot of terrific choices on the market to choose. With exhaustive research and assessments, the options we reviewed earlier were our preferred Sanders. That doesn't mean there aren't several additional terrific 1 x 30 Inch Belt Sanders.