Top 2 Best 2 Amp Motor Sanders

What Real People Are Saying About The WEN 6515T

Great for the price. belts easy to find, change and track.

wonderful little sander. the belt section is easy to access, switch belts and track the belts to center. There is a metal plate behind the belt so that sharpening chisels, scissors, knives and other hand tools is very easy. The motor is strong, and I have not noticed any bogging down during my use. I used this, straight out of the box, for nearly 3 hours and had no motor issues whatsoever. The deck on the belt is difficult to keep tight, so it frequently falls if I rest any tool on it. I chose not to use the deck anymore, and just sharpen my tools free-hand. The disc section is junk. The pad is glued to the machine, so in order to change pads I had to use a heat gun to pull the pad off, then clean the adhesive remnant with mineral spirits. I added a hook and loop pad to the disc section and just buy hook and loop disc paper for it. problem solved. the deck for the disc is better than the deck for the belt, but it is still pretty flimsy. The angles on the decks are not accurate. The base is sturdy, and I have not had any walking, wobbling or balance issues so far. I have put about 20 hours on this machine in the past 3 weeks and have already ordered another one for my brother for christmas.

Outstanding Quality and Price

This is my first WEN product. I was hesitant to purchase it due to the low price and expecting to "get what you pay for". Well, I was wrong. I have used this for two days, a few hours each day. The belts are still intact and have not had to make any adjustments. I am not 100% convinced the instructions were correct, but if you use your head, logic and common sense, the installation works out. This is a well made sander with a powerful motor.

I have also borrowed the H.F. version of this sander and prefer WEN. The quality is comparable, but the price of the WEN is much better and the setup was much easier.

You will not go wrong with the WEN belt sander.

Quality control issue

After returning the first one I received I got a decent sander. The first one I received had bad rollers that wouldn’t align the belt properly and the table was very rough and had lots of corrosion. The disc sander housing was very rough and chipped. I’m satisfied with the second sander received and it works well

Good price on a light work sander.

This is not for heavy duty work, but I bought it for knife sharpening and it works great for that. Also I make bassoon reeds and the disc sander will be great for evening up cane. The belts require a little strength to change as the spring on the tensioning pulley is very strong, but you can use a wrench or a big screwdriver as a lever to help out.

A nice addition to the small home shop.

Plenty of power, dust collection systems work well when coupled to a small shop vac. The work tables are decent and adjustments are relatively precise. Included abrasives are ok. I was pleasantly surprised how true the belt runs. It does bog down a little if you really are hogging in but overall this machine has plenty of power to get the job done. It isn't even all that noisy. Anyone know what type of motor this has? It really is smooth with very little to no vibration. I was not expecting that. Again, for the price (not expecting the world from it) I think this really can't be better! Great job WEN.


People's Choice

These Are Some Of The Highest Rated 2 Amp Motor Sanders Available Today
Anesty FRSZ1702 featured image

2. Anesty FRSZ1702 Detail Sander

  • (29 Ratings)

The fact is that the WEN 6515T was the 2 Amp Motor Sanders that we rated the highest. That being said, there were a few other truly high quality 2 Amp Motor Sanders we wanted to showcase here that only just fell short.

Anesty is yet another top manufacturer of Sanders. They build the tool next up on our rundown. Anesty's Detail Sanders are great as well. I was excited to try the model FRSZ1702 and I was not let down!

This Detail Sander is only $19.99. That is a fantastic deal for a quality Sander like the FRSZ1702 by Anesty. If you unsure about our number one selection, I'd look into the Anesty FRSZ1702 next. It's a top quality tool at a good price.

Full Anesty FRSZ1702 Review

Anesty FRSZ1702 Features

【EFFICIENCY】-2 amp motor for material removal with 13,000 orbits per minute,the mouse sander Fits the palm of the force range,even one-handed operation is also effortless,make it more efficient;

【FIT FOR TIGHT SPACES】-compact and ergonomic design meet you different applications of removing paint from wood, metal, or plastic of corners and other hard-to-reach areas;

【HIGH-PERFORMANCE DUST COLLECTION 】-dust collection can ensure healthy respiratory and keep the work area clean,and its buckle connection design keeps the box from falling off during work, dust box easy to disassemble,it is an ideal tool for indoor detail works;

【LED LIGHT DESIGN 】-LED light illuminate working area to improve the working efficiency of dark environment,make Operation easier;

【WHAT YOU GET】 -you can get 1 x Standard detail sanding paper ,1 x Triangle attachment sanding paper ,1 x Finger sanding paper.f you need more replacement sandpaper, you can consider this one