Top 10 Best Miter Gauge Saws

What Real People Are Saying About The Powermatic PM1000

Awesome saw! LOVE IT

Awesome saw! LOVE IT. arrived as expected. Took my time setting it up. Table is a whopping 0.002" out - NICE job Powermatic - couldn't dial it in any better! Cuts smooth, fact. Only down side: No thin kerf riving knife. Having a friend mill the existing down to 0.079".. They offer a thin kerf knife for the PM2000, but not the 1000. Hence, 4 stars.

It is easy to set up except for adjusting the riving knife
  • Anne - May 28, 2018

This machine is worth the money. I worked with a Craftsman table saw for 20 years. I now realize I should have bought the Powermatic to start with. It is easy to set up except for adjusting the riving knife; the instructions are the issue here. The power on the 1.5 hp motor is adequate for any lumber 2 to 3 inches thick. I wold say if you are upgrading your table saw this is a great purchase.

Five Stars

GREAT tool , love it

good saw

This thing is pretty much the same as the pm2000. Same beefy cast iron blade tilt and raise mech. The shaped base it sits on is not cast iron but the saw weighs a ton. Very well machined parts very well made. It ran on a 15 amp circuit but I put in a 20 amp anyway. No problems there. Runs and cuts great, no vibration. Love the fence and how easy it is to adjust to line up with the miter slots. Blade adjustment is easy too. 4 accessible bolts on the cabinet and you can tap the table around to line up with the blade. The dust collection works great. I never installed the riving knife or safety guard. Overall its s great working saw and a huge upgrade from a contractor type. Very Happy with it. I think its worth the money.( if you routinely cut stout oaken timbers get a 3 HP saw.)

and the folks at Powermatic are friendly and happy to help with any issues

Fabulous table saw - just the right size and power, and the folks at Powermatic are friendly and happy to help with any issues. I can see why this make is considered the Caddilac of saws.

People's Choice

These Are Some Of The Highest Rated Miter Gauge Saws Available Today
Rockwell RK7323 featured image

2. Rockwell RK7323 Table Saw

  • (955 Ratings)

The fact is that the Powermatic PM1000 was the Miter Gauge Saws that we ranked at the top. However, there were several other truly high quality Miter Gauge Saws we wanted to show you here that just barely missed the mark.

Rockwell is another top producer of Saws. They produce the tool next up on our lineup. Rockwell's Table Saws are great as well. It was great to try out the RK7323. I was very happy with this tool!

This Table Saw is only $97.59. That is a fantastic deal for a premium Saw like the RK7323 by Rockwell. The Rockwell RK7323 is really a solid option. Of you are unsure about our top pick, I'd suggest you opt for this Saw.

Full Rockwell RK7323 Review

Rockwell RK7323 Features

Portable tabletop saw sets up in seconds to cut wood, metal, tile, aluminum and plastic – performs rip, scroll, miter, and inside cuts

Compact and portable with built-in tabletop handle to carry anywhere ­– weighs in at less than 15 pounds. No-Load Speed - 3000/minute. The Bladerunner X2 cuts a variety of materials depending on the type of blade you’re using. Pick the blade that best suits the job, from scroll cutting, to rip cuts, the Bladerunner’s cutting capacity will vary depending on the material Wood- 1-1/2 Inch. PVC pipe- 1-1/4 Inch. Aluminum- 3/8 Inch. Steel- 1/8 Inch. Ceramic- 3/8 Inch

Hold-down guard and splitter cuts wider material, and a larger rip fence for better control and a nice, accurate cut. Table Size- 15-3/4 x 17 Inches

Instant, tool-free blade changes; change the blade in 3 seconds – compatible with any 4" t-shank jigsaw blades

Includes a vacuum port, a large steel rip fence, miter gauge, 5-piece starter blade set and manufacturer’s 3-year warranty.Stroke Length:3/4 inches.Power Input:5.5 Amps

Besides the selections we researched above, I would definitely evaluate the DEWALT DW745 and the 2736-20 by Milwaukee. Both tool manufacturers are popular for their premium Saws. both of these distinct options earned very good user reviews as well. The DEWALT boasts a score of 4.6/5 when compared to 5.0/5 star rating given to the 2736-20 by Milwaukee.

The DW745 by DEWALT gives a few really premium features including 22 kilograms unit weight and optimized footprint make this the most portable saw in its class. Shoe bevels 0 to 45 for beveled cuts. The 2736-20 by Milwaukee however, is tough to beat featuring 24-1/2 ft. Rip Capacity to rip 4x8 sheets of plywood or OSB. Maximum bevel of 47 degrees. plus On board storage for guard, riving knife, push stick, fence and miter gauge..

Either of these two options are a superb decision if you're in the market for Miter Gauge Saws

Honorable Mentions

If you are thinking that the Miter Gauge Saws mentioned above don't do it for you, here are a few additional selections that might fit you better. We identified numerous terrific Saws during our review. Using in depth study and assessments, the choices above are our preferred Saws. Having said that, these Saws listed below deliver a number of special characteristics on top of the fact that they are each highly rated Miter Gauge Saws.