Top 10 Best DEWALT Stationary Air Compressors

People's Choice

These Are Some Of The Highest Rated DEWALT Stationary Air Compressors Available Today
DEWALT DXCMLA1983054 featured image

2. DEWALT DXCMLA1983054 Stationary Air Compressor

  • (17 Points)
Price Available

This is an excellent high capacity Stationary Air Compressor with low decibels. Contacted DEWALT and without hesitation Nicole and Natalie were amazing. The cast iron compressor pump is definitely quieter than my old aluminum one was. The DEWALT DXCMLA1983054 runs very smooth and was easy to wire up. Purchased this Stationary Air Compressor and had a few hiccups.

The fact is that the DEWALT DXCMLA1983012 Stationary Air Compressor B00U7G4XBY was the DEWALT Stationary Air Compressors that we graded at the top. With that said, there are a number of other superb alternatives when it comes to DEWALT Stationary Air Compressors. We have a breakdown of them here.

DEWALT is another major manufacturer of Stationary Air Compressors. They make the tool next on our rundown. DEWALT's Stationary Air Compressors are no exception. It was fantastic to try the DXCMLA1983054. I was very pleased with this tool!

This Stationary Air Compressor is only $617.49. That is a terrific deal for a premium Stationary Air Compressor like the DXCMLA1983054 by DEWALT. If you uncertain about our top choice, I'd check out the DEWALT DXCMLA1983054 next. It's a top quality tool at a terrific price.

Full DEWALT DXCMLA1983054 Review

DEWALT DXCMLA1983054 Features

7.0 CFM at 40 psi and 5.7 CFM at 90 psi with 1.9 RHP

155 PSI max pressure for optimum tool performance

30 gallon ASME vertical portable tank with pre-attached pneumatic tires for maximum portability

Dual voltage motor is wired for standard 120 volt outlet and may also be converted for 240 volt application

Shipped with synthetic oil for optimum performance and long life

Apart from the selections we reviewed already, I would have a look at the DXCMTA5090412 by DEWALT and the DXCMPA1982054 by DEWALT. Both these tool manufactures are regarded as a couple of the leading producers of superior Stationary Air Compressors. Each of these particular options earned great user ratings as well. The DEWALT received a user rating of 3.9/5 as contrasted against the 4.8/5 star rating received by the DEWALT DXCMPA1982054.

The DEWALT DXCMTA5090412 provides some very choice features such as Features a durable Briggs & Stratton XR950 OHV gas engine with dual ball bearings that provides durability and extended engine life. The DXCMPA1982054 by DEWALT however, is hard to beat offering 7.0 CFM at 40 psi and 5.7 CFM at 90 psi plus 155 PSI max pressure for optimum tool performance.

Both of these two selections make an outstanding decision for someone whose shopping for DEWALT Stationary Air Compressors
DEWALT DXCMTA5090412 featured image

3. DEWALT DXCMTA5090412 Stationary Air Compressor

  • (14 Points)

Item weighs a lot and was almost impossible to move with a dolly. The DEWALT DXCMTA5090412 way better than what I had before. You should also have the right strippers and wire cutters. It is so nice not to get annoyed every time the compressor comes on when using it. If I was in commercial business I would be buying the much cheaper oilless compressors.

DEWALT DXCMPA1982054 featured image

4. DEWALT DXCMPA1982054 Stationary Air Compressor

  • (12 Points)

A bolt pattern in the manual would have been very helpful. I've only had mine for a few weeks but I'm loving it. Draining it is not as fun as some others, with the up front drain valve. Rattle wrench on a tire rotation with no problems. Installed this unit to protect my compressor and replaced the start capacitor, too.

Honorable Mentions

If you are thinking that the DEWALT Stationary Air Compressors mentioned above fail to cut it, here are a few alternative selections that might offer a more suitable fit. We identified quite a few terrific Stationary Air Compressors during our analysis. Using exhaustive analysis and assessments, the selections above were our favorites. However, the Stationary Air Compressors listed below deliver several special characteristics and are each highly rated DEWALT Stationary Air Compressors.

DEWALT DXCMLA3706056 featured image

5. DEWALT DXCMLA3706056 Stationary Air Compressor

  • (10 Points)

The cast iron compressor pump is definitely quieter than my old aluminum one was. Aluminum tanks are nice to save on weight. Quick recharge keeps us gunning. Very impressed with fit and finish. I used it to replace my roof and the only racket was the nail gun.

DEWALT DXCMLA1683066 featured image

6. DEWALT DXCMLA1683066 Stationary Air Compressor

  • (8 Points)

Minor down side: Oil was a bit low. The performance is phenomenal compared to industry standard equipment. As usual, the owners manual is almost worthless. Purchased all parts required to hook it up from DEWALT. I had a hotdog shape before and was easier to handle.

DEWALT DXCMLA4708065 featured image

7. DEWALT DXCMLA4708065 Stationary Air Compressor

  • (4 Points)

Luckily it fell in the dirt and didn't damage it. The cast iron compressor pump is definitely quieter than my old aluminum one was. That is one of its two "cons" that aren't a real factor for myself personally. Purchased all parts required to hook it up from DEWALT. If you are in the market for a compressor, DEWALT is definitely the best in my opinion.

DEWALT DXCMV7518075 featured image

8. DEWALT DXCMV7518075 Stationary Air Compressor

  • (3 Points)

The manual states it can handle staplers, nailers, and wrenches. Luckily it fell in the dirt and didn't damage it. A bolt pattern in the manual would have been very helpful. Quick recharge keeps us gunning. I replaced it and continued using the compressor.

DEWALT DXCMH9919910 featured image

9. DEWALT DXCMH9919910 Stationary Air Compressor

  • (2 Points)

Works like a champ so far, and I'm really happy with it. It isn't going to keep up with a sandblaster or equivalent. The installation was easy except I had difficulty attaching a nipple to the tank. The compressor works perfectly - but beware - it is also loud. It isn't going to keep up with a sandblaster or equivalent.

DEWALT DXCMLA1682066 featured image

10. DEWALT DXCMLA1682066 Stationary Air Compressor

  • (2 Points)

I used it to replace my roof and the only racket was the nail gun. This one was a true reality adjustment. Just what I needed for my shop. I primarily use it as air for a Miller 625 plasma cutter. Works like a champ so far, and I'm really happy with it.